WallPod : EV Multi-Mode | Type 1 Tethered | 5 Meter | 16/32 Amp(3.6/7.2kW) | 3 Pin Socket | IP65 |
WallPod EV: Multi-Mode is a simple, low-cost, easy to install charging unit offering both, 16amp or available 32amp type 1 or type 2 Mode 3 charging as well as an IP65 rated 13amp socket, suitable for both Mode 2 overnight charging and home maintenance use.
- A simple, cost effective Mode 3, 16amp or available 32amp charger specifically designed for charging electric vehicles at home
- available with J1772 (type 1) or IEC62196 (type 2) charging plugs attached to 5 meter tethered leads.
- Cable management system and remote socket holster comes as standard
- Includes IP65 rated 13amp socket, suitable for both Mode 2overnight charging and home maintenance use.
- wall mountable remote secure charging gun holster comes as standard
- Easy to install and maintain
- ZE Ready 1.2 Tested and Nissan Accredited
- IP65 weatherproof (believed to be the highest weather rated HomeCharger available
- CE Certified
- BSI Certificated
- Corrosion resistant
- UV stabilised
- Incredibly hard-wearing
- Built-in overload and DC sensitive fault current protection
- Warm white base unit (other colours available upon request or on the WallPod Customizer)
- Green service pods (other colours available upon request or on the WallPod Customizer)
- Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
- Glow wire rating tested to IEC60695-2-13
- BSI certificated to BS EN 60335-1 for safe use in the home
- Manufactured in compliance with BS7671 wiring regulations
- Compliant with IET EV regulations
- Corrosion resistant
- UV stabilised
- BS EN 60529 : IP65 category 1 certification (weatherproof)
- Operating temperature 30C to + 50C
- Easy to install / low maintenance
- Designed to be permanently located indoors or outdoors
- Available in both 16amp (3.6kW) or 32amp (7.2kW)
- Mode 3 IEC61851-1 compliant communication protocol
- Built-in LED charging status indicator
- A built-in 20amp or 40amp RCBO accessible via an IP65 rated access door
- Full overload and DC sensitive fault current protection
- 230V AC / 50Hz
- Multiple supply cable entry points
- Optional facility to lock RCBO access door and 13amp socket pod
- Optional security key switch control ( to lock off the unit)
- Remote socket holster EVRS0010 FREE!
EV Public Charging Cable | Type 1 to Type 2 | 16/32 Amp | 3.6/7.2 kW | 5/10 Metre |
Our charging cables are of the highest quality and standard.
They allow you to charge your car from any public or home EV charging point and come in 5 or 10 meters to suit all your needs.
The Type 2 end of this cable must always be plugged directly into a charge point socket, this can not be used as an extension or an adaptor to a tethered lead.
-16/32 Amp single phase at 3.6/7.2 kW
-Type 1 (SAEJ1772) to Type 2 (IEC62196 / Mennekes)
-5/10 metre long Lightweight and ultra-flexible easy to store and transport.
-Long lasting and reliable
-J1772 plug complete with padlock facility (padlock available in options)
-Operating voltage 240VAC
-Tested to 2,500 VDC
-Operating temperature range -30C to +60C
-Hard-wearing, polybutylene terephthalate (PBT) handle
-Copper alloy contacts
This cable comes with Type 2 and Type 1 connectors. The Type 2 must be connected to the charge point socket and Type 1 to your car.
This cable is suitable for the following vehicles:
Data Sheet PDF
Disclaimer: The look might slightly differ to the pictured cable. All function and specifications are the same.
WallPod : EV Charging Unit | Type 2 Socket | 16/32 Amp(3.6/7.2kW) | IP65 |
A simple, affordable CommercialCharger ideal for charging all Type 1 and type 2 compatible vehicles at home. A simple, cost effective Mode 3, 16amp or available 32amp specifically designed for...
EV Home charging cable | Type 1 to Schuko plug | 10/16 Amp | 5/10 Metre | Mode 2 |
Type 1 Portable Mode 2 EURO 2Pin EVSE Charger (10A/16A) 5M.
This cable is suitable for charging from EU sockets.
EV Charging Cable Carry Case
Switch between 10amp and 16amp
-EU Schuko power plug
-Type 1 charging plug (J1772)
-Voltage range: 220V ± 10%
-Maximum power: 2.2 kW / 3.6kW
-Auto charge recovery: Yes
-Over current protection: Yes
-16amp cable 3G2.5 + 2 x 0.75mm
-10,000 mating cycles
-Cable strain relief feature insulated terminal design
-Built-in LED charging status indicator
-Operating temperature: -30° to +50°
-CE certified / TUV certified
This cable has a type 1 socket for your car. Suitable for the following cars:
WallPod : EV charging unit | Type 1 Tethered | 16/32 Amp(3.6/7.2kW) | 5 Metre | IP65 |
A simple, affordable Mode 3 HomeCharger ideal for charging all Type 1 compatible vehicles at home such as Nissan + Kia. J1722 (type 1) charging plug attached to a 5meter...