WallPod Solar: EV Charging Unit | Type 2 Tethered | 5 Meter | 16/32 Amp(3.6/7.2kW) | IP65 |
The WALLPOD:EV SolarCHARGE is a cost-efficient EV charging unit which has been designed to benefit homeowners who have, or intend to install, a solar generation system
- IEC 61851-1 Mode 3 fast charging
- IEC 62196 (Type 2) 5 Meter Tethered Cable
- Charging speeds - 3.6kW (16A) & 7.2kW (32A)
- Built in backlit 2.4” LCD display screen
- Built in 2 mode selection button (Solar Only or Solar + Grid)
- Summary feature providing charging history, CO2 saved, etc.
- Monitors & tracks solar generation via the current transformer (CT) & data cable
- Built in DC sensitive protective device, electrical contactor & class 1 MID compliant kWh meter
- Supplied with external overload and fault current protection (RCBO)
- Certificated by the BSI as safe to use in the domestic environment
- Easy to install and maintain
- IP65 Weatherproof & UV stabilised
- Corrosion resistant, fire retardant & impact resistant design
- CE certified
- Dimensions - 179mm x 367mm x 142mm (W x H x D)
- Colour - Anthtracite Grey / Yellow
- Unit Material - Polycarbonate (303 EP-22)
- Operating Temperature -20C to +40C
EV Public Charging Cable | Type 1 to Type 2 | 16/32 Amp | 3.6/7.2 kW | 5/10 Metre |
Our charging cables are of the highest quality and standard.
They allow you to charge your car from any public or home EV charging point and come in 5 or 10 meters to suit all your needs.
The Type 2 end of this cable must always be plugged directly into a charge point socket, this can not be used as an extension or an adaptor to a tethered lead.
-16/32 Amp single phase at 3.6/7.2 kW
-Type 1 (SAEJ1772) to Type 2 (IEC62196 / Mennekes)
-5/10 metre long Lightweight and ultra-flexible easy to store and transport.
-Long lasting and reliable
-J1772 plug complete with padlock facility (padlock available in options)
-Operating voltage 240VAC
-Tested to 2,500 VDC
-Operating temperature range -30C to +60C
-Hard-wearing, polybutylene terephthalate (PBT) handle
-Copper alloy contacts
This cable comes with Type 2 and Type 1 connectors. The Type 2 must be connected to the charge point socket and Type 1 to your car.
This cable is suitable for the following vehicles:
Data Sheet PDF
Disclaimer: The look might slightly differ to the pictured cable. All function and specifications are the same.
WallPod : EV Charging Unit | Type 2 Socket | 16/32 Amp(3.6/7.2kW) | IP65 |
A simple, affordable CommercialCharger ideal for charging all Type 1 and type 2 compatible vehicles at home. A simple, cost effective Mode 3, 16amp or available 32amp specifically designed for...
EV Home charging cable | Type 1 to Schuko plug | 10/16 Amp | 5/10 Metre | Mode 2 |
Type 1 Portable Mode 2 EURO 2Pin EVSE Charger (10A/16A) 5M.
This cable is suitable for charging from EU sockets.
EV Charging Cable Carry Case
Switch between 10amp and 16amp
-EU Schuko power plug
-Type 1 charging plug (J1772)
-Voltage range: 220V ± 10%
-Maximum power: 2.2 kW / 3.6kW
-Auto charge recovery: Yes
-Over current protection: Yes
-16amp cable 3G2.5 + 2 x 0.75mm
-10,000 mating cycles
-Cable strain relief feature insulated terminal design
-Built-in LED charging status indicator
-Operating temperature: -30° to +50°
-CE certified / TUV certified
This cable has a type 1 socket for your car. Suitable for the following cars:
WallPod : EV charging unit | Type 1 Tethered | 16/32 Amp(3.6/7.2kW) | 5 Metre | IP65 |
A simple, affordable Mode 3 HomeCharger ideal for charging all Type 1 compatible vehicles at home such as Nissan + Kia. J1722 (type 1) charging plug attached to a 5meter...