WallPod : EV Charging Unit | Type 2 Socket | 16/32 Amp(3.6/7.2kW) | IP65 |
EVWP2010
€316,99
A simple, affordable CommercialCharger ideal for charging all Type 1 and type 2 compatible vehicles at home.
A simple, cost effective Mode 3, 16amp or available 32amp specifically designed for charging electric vehicles at home
Type 2 charging socket.
Easy to install and maintain
ZE Ready 1.2 Tested and Nissan Accredited
Believed to be the lowest priced full mode 3 fast charger in the UK
IP65 weatherproof rating believed to be the highest weather rated HomeCharger available
CE Certified
BSI Certificated
Corrosion resistant
UV stabilised
Incredibly hard-wearing
Built-in overload and current protection
Specifications
Warm white base unit (other colours available upon request or on the WallPod Customizer)
Green service pods (other colours available upon request or on the WallPod Customizer )
Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
Glow wire rating tested to IEC60695-2-13
BSI certificated to BS EN 60335-1 for safe use in the home
Manufactured in compliance with BS7671 wiring regulations
Compliant with IET EV regulations
Corrosion resistant
UV stabilised
BS EN 60529 : IP65 category 1 certification (weatherproof)
Operating temperature 30C to + 50C
Performance
Easy to install / low maintenance
Designed to be permanently located indoors or outdoors
Available in both 16amp (3.6kW) or 32amp (7.2kW)
Mode 3 IEC61851-1 compliant communication protocol
Built-in LED charging status indicator
A built-in 20amp or 40amp RCBO accessible via an IP65 rated access door
Full overload and DC sensitive fault current protection
230V AC / 50Hz
Multiple supply cable entry points
EVWP2010 16amp (3.6kW)
EVWP2020 32amp (7.2kW)
Related Items
EV Public Charging Cable | Type 1 to Type 2 | 16/32 Amp | 3.6/7.2 kW | 5/10 Metre |
€101,99 €111,44
Our charging cables are of the highest quality and standard.
They allow you to charge your car from any public or home EV charging point and come in 5 or 10 meters to suit all your needs.
The Type 2 end of this cable must always be plugged directly into a charge point socket, this can not be used as an extension or an adaptor to a tethered lead.
-
This cable comes with Type 2 and Type 1 connectors. The Type 2 must be connected to the charge point socket and Type 1 to your car.
This cable is suitable for the following vehicles:
Data Sheet PDF
Disclaimer: The look might slightly differ to the pictured cable. All function and specifications are the same.
EV Public Charging Cable | Type 2 to Type 2 | 16/32 Amp | 3.6/7.2 kW | 5/10 Metre |
€110,99
Our charging cables are of the highest quality and standard.
They allow you to charge your car from any public or home EV charging point and come in 5 or 10 meters to suit all your needs.
The Type 2 end of this cable must always be plugged directly into a charge point socket, this can not be used as an extension or an adaptor to a tethered lea
-
-16/32 Amp single phase at 3.6/7.2 kW
-Type 2 to Type 2 (IEC62196 / Mennekes)
-5/10 meter long Lightweight and ultra-flexible easy to store and transport.
-Long lasting and reliable
-IEC certified
-TUV certified
-CE compliant
-IP44 rated
-Operating voltage 240VAC
-Tested to 2,500 VDC
-Operating temperature range -30C to +60C
-Hard wearing, polybutylene terephthalate (PBT) handle
-Copper alloy contacts
Disclaimer: The look might slightly differ to the pictured cable. All function and specifications are the same.
QUBEV - EV Charging Unit | Type 2 Socket | 32 Amp/7.2 kW | IP65 |
€222,00
The QUBEV is the UK's lowest cost fully featured universal EV / Electric vehicle charging unit. With a built in Amp selector by default you can install this unit on...
WallPod : EV charging unit | Type 2 Tethered | 16/32 Amp(3.6/7.2kW) | 5 Metre | IP65 |
€386,99
A simple, affordable Mode 3 HomeCharger ideal for charging all Type 2 compatible vehicles at home such as BMW's, Tesla, VW. IEC62196 (type 2) charging plug attached to a 5meter...