WallPod : EV charging unit | Type 2 Socket | 3 Phase | 16/32 Amp(11/22kW) | 3 Pole Isolator | IP65 |
WallPod EV: Commercial Charge is a simple, low-cost, easy to install mode 3 fast-charge EV charging station offering 16amp single or 3 phase (type 2) IEC62196 sockets complete with hatch lock. Designed specifically for charging all Mode 3 electric vehicles in commercial locations such as offices, factories, restaurants, hotels, sport venues, etc for staff, customers or fleets.
You will need a 3 phase supply to run this unit.
A simple, cost effective Mode 3, 16amp or available 32amp unit specifically designed for charging electric vehicles at home
suitable for every mode 3 electric vehicle (providing the driver has the correct lead please see in the lead section of the One Stop website)
Easy to install and maintain
ZE Ready 1.2 Tested and Nissan Accredited
Best prices in Europe
OLEV approved / Grant eligible
IP65 weatherproof rated
Built-in overload and DC sensitive fault current protection
Warm white base unit (other colours available upon request or on the WallPod Customizer)
Green service pods (other colours available upon request or on the WallPodCustomizer )
Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
Glow wire rating tested to IEC60695-2-13
BSI certificated to BS EN 60335-1 for safe use in the home
Manufactured in compliance with BS7671 wiring regulations
Compliant with IET EV regulations
BS EN 60529 : IP65 category 1 certification (weatherproof)
Operating temperature 30C to + 50C
Easy to install / low maintenance
Designed to be permanently located indoors or outdoors
Available in 16amp (3.6kW) or 32amp (7.2kW) 16amp 3phase (11kW) or 32amp 3phase (22kW)
Mode 3 IEC61851-1 compliant communication protocol
Built-in LED charging status indicator
A built-in 3pole isolator accessible via an IP65 rated access door
A built-in 3pole isolator but with no RCBO fault current protection
400V AC / 50Hz
Multiple supply cable entry points
EVWP2036 & EVWP2046 is delivered assembled including a 3pole isolator but with no RCBO fault current protection
EVWP2056 & EVWP2066 is delivered with no isolator but comes with a separate RCBO fault current protection to be installed at source.
Optional facility to lock isolator access door
Optional security key switch control (to lock of the unit)
All options available in drop down tabs
WallPod : EV charging unit | Type 2 Tethered | 16/32 Amp(3.6/7.2kW) | 5 Metre | IP65 |
A simple, affordable Mode 3 HomeCharger ideal for charging all Type 2 compatible vehicles at home such as BMW's, Tesla, VW. IEC62196 (type 2) charging plug attached to a 5meter...
WallPod : EV Charging Unit | Type 2 Socket | 16/32 Amp(3.6/7.2kW) | IP65 |
A simple, affordable CommercialCharger ideal for charging all Type 1 and type 2 compatible vehicles at home. A simple, cost effective Mode 3, 16amp or available 32amp specifically designed for...
WallPod : EV charging unit | Type 2 Tethered | 3 Phase | 16/32 Amp(11/22kW) | 5 Metre | IP65 |
A simple, low cost, Wall Mounted home charger ideal for charging European Three phase cars. You will need a 3 phase supply to install this unit. A simple, cost effective...
WallPod : EV charging unit | Type 1 Tethered | 16/32 Amp(3.6/7.2kW) | 5 Metre | IP65 |
A simple, affordable Mode 3 HomeCharger ideal for charging all Type 1 compatible vehicles at home such as Nissan + Kia. J1722 (type 1) charging plug attached to a 5meter...