WallPod : EV Charging Unit | 3 Pin Socket | 13 Amp | IP65 | UK |
EVWP0020
€96,99
Description
- The Entry Level EV Charger ideal for home builders wishing to offer low-cost EV Charging to satisfy planning applications and requirements
- Fully prepared for future upgrade to full mode 3 fast charging using a One Stop upgrade kit
- Can be used as an EV charger or a 13amp outdoor maintenance socket
- Includes built-in overload/fault current protection
- Includes an IP65 outdoor 13amp socket
- Charges almost all current EVs at mode 2
- Ideal for charging electric bikes, scooters, mobility vehicles, golf buggies if required
- Safe and secure AC indoor and outdoor charging
Specifications
- Warm white base unit (other colours available upon request)
- Green service pods (other colours available upon request)
- Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
- Glow wire rating tested to IEC60695-2-13
- BSI certificated to BS EN 60335-1 for safe use in the home
- Manufactured in compliance with BS7671 wiring regulations
- Compliant with IET EV regulations
- Corrosion resistant
- UV stabilised
- BS EN 60529 : IP65 category 1 certification (weatherproof)
- Operating temperature -30C to + 50C
Performance
- Easy to install / low maintenance
- Designed to be permanently located indoors or outdoors
- Able to charge almost all types of electric pushbikes, scooters, mopeds, and mobility vehicles and mode 2 compatible Electric vehicles
- A 13amp socket protected by an IP65 rated access door (locking option available)
- 13amp domestic socket will fully charge an electric bike or mobility vehicle
- Doubles as a home outdoor maintenance socket
- A built-in 16amp 30mA RCBO accessible via an IP65 rated access door (locking option available)
- Full overload and fault current protection
- 230V AC / 50Hz
- Cable entry points top, bottom and back
Option to be easily upgraded to Mode 3 fast charging using a One Stop upgrade kit
EVWP0020
Related Items
EV Public Charging Cable | Type 2 to Type 2 | 16/32 Amp | 3.6/7.2 kW | 5/10 Metre |
€110,99
Our charging cables are of the highest quality and standard.
They allow you to charge your car from any public or home EV charging point and come in 5 or 10 meters to suit all your needs.
The Type 2 end of this cable must always be plugged directly into a charge point socket, this can not be used as an extension or an adaptor to a tethered lea
-
-16/32 Amp single phase at 3.6/7.2 kW
-Type 2 to Type 2 (IEC62196 / Mennekes)
-5/10 meter long Lightweight and ultra-flexible easy to store and transport.
-Long lasting and reliable
-IEC certified
-TUV certified
-CE compliant
-IP44 rated
-Operating voltage 240VAC
-Tested to 2,500 VDC
-Operating temperature range -30C to +60C
-Hard wearing, polybutylene terephthalate (PBT) handle
-Copper alloy contacts
Disclaimer: The look might slightly differ to the pictured cable. All function and specifications are the same.
WallPod : EV charging unit | Type 2 Tethered | 16/32 Amp(3.6/7.2kW) | 5 Metre | IP65 |
€386,99
A simple, affordable Mode 3 HomeCharger ideal for charging all Type 2 compatible vehicles at home such as BMW's, Tesla, VW. IEC62196 (type 2) charging plug attached to a 5meter...
EV Home charging cable | Type 2 to Schuko plug | 10/16 Amp | 5/10 Metre | Mode 2 |
€176,99
Type 2 Portable Mode 2 EURO 2Pin EVSE Charger (10A/16A) 5M.
This cable is suitable for charging from EU sockets.
EV Charging Cable Carry Case
Switch between 10amp and 16amp
-
This cable comes with a Type 2 connector for your car.
This cable is suitable for the following vehicles:
WallPod : EV Charging Unit | Type 2 Socket | 16/32 Amp(3.6/7.2kW) | IP65 |
€316,99
A simple, affordable CommercialCharger ideal for charging all Type 1 and type 2 compatible vehicles at home. A simple, cost effective Mode 3, 16amp or available 32amp specifically designed for...