WallPod : EV charging unit | Type 2 Tethered | 3 Phase | 16/32 Amp(11/22kW) | 5 Metre | IP65 |
A simple, low cost, Wall Mounted home charger ideal for charging European Three phase cars. You will need a 3 phase supply to install this unit.
A simple, cost effective Mode 3, 16amp or available 32amp specifically designed for charging electric vehicles at home.
IEC62196 (Type 2) charging plug attached to a 5meter long tethered lead
Cable management as standard remote socket holster as an option
Easy to install and maintain
ZE Ready 1.2 Tested
Believed to be the lowest priced full mode 3 fast charger in the UK
IP65 weatherproof (believed to be the highest weather rated Home Charger available
Warm white base unit (other colours available upon request or on the WallPod Customizer)
Grey service pods (other colours available upon request or on the WallPodCustomizer )
Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
Glow wire rating tested to IEC60695-2-13
BSI certificated to BS EN 60335-1 for safe use in the home
Manufactured in compliance with BS7671 wiring regulations
Compliant with IET EV regulations
BS EN 60529 : IP65 category 1 certification (weatherproof)
Operating temperature 30C to +50C
Easy to install / low maintenance
Designed to be permanently located indoors or outdoors
Available in both 16amp (11 kW) or 32amp (22 kW)
Mode 3 IEC61851-1 compliant communication protocol
Built-in LED charging status indicator
A built-in Three Phase Isolator accessible via an IP65 rated access door
400V AC / 50Hz
Multiple supply cable entry points
Optional wall mountable remote charging gun holster
Optional facility to lock access door
Optional security key switch control ( to lock off the unit)
All options available in the drop down tabs
EV Public charging cable | Type 2 to Type 2 - 3 Phase | 32 Amp | 22 kW | 5/10 Metre |
Our charging cables are of the highest quality and standard.
They allow you to charge your car from any public or home EV charging point and come in 5 or 10 meters to suit all your needs. This is the 3 Phase version.
The Type 2 end of this cable must always be plugged directly into a charge point socket, this can not be used as an extension or an adaptor to a tethered lead.
-32 Amp 3 phase at 22 kW
-Type 2 to Type 2 (IEC62196 / Mennekes)
-5/10 metre long Lightweight and ultra-flexible easy to store and transport.
-Long-lasting and reliable
-Operating voltage 400VAC
-Tested to 2,500 VDC
-Operating temperature range -30C to +60C
-Hard-wearing, polybutylene terephthalate (PBT) handle
-Copper alloy contacts
This cable comes with Type 2 connectors.
This cable is suitable for the following vehicles:
Disclaimer: The look might slightly differ to the pictured cable. All function and specifications are the same.