WallPod : EV charging unit | Type 2 Socket | 3 Phase | 16/32 Amp(11/22kW) | 3 Pole Isolator | IP65 |
EVWP2036
€433,99
WallPod EV: Commercial Charge is a simple, low-cost, easy to install mode 3 fast-charge EV charging station offering 16amp single or 3 phase (type 2) IEC62196 sockets complete with hatch lock. Designed specifically for charging all Mode 3 electric vehicles in commercial locations such as offices, factories, restaurants, hotels, sport venues, etc for staff, customers or fleets.
You will need a 3 phase supply to run this unit.
Description
A simple, cost effective Mode 3, 16amp or available 32amp unit specifically designed for charging electric vehicles at home
suitable for every mode 3 electric vehicle (providing the driver has the correct lead please see in the lead section of the One Stop website)
Easy to install and maintain
ZE Ready 1.2 Tested and Nissan Accredited
Best prices in Europe
OLEV approved / Grant eligible
IP65 weatherproof rated
CE Certified
BSI Certificated
Corrosion resistant
UV stabilised
Incredibly hard-wearing
Built-in overload and DC sensitive fault current protection
Specifications
Warm white base unit (other colours available upon request or on the WallPod Customizer)
Green service pods (other colours available upon request or on the WallPodCustomizer )
Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
Glow wire rating tested to IEC60695-2-13
BSI certificated to BS EN 60335-1 for safe use in the home
Manufactured in compliance with BS7671 wiring regulations
Compliant with IET EV regulations
Corrosion resistant
UV stabilised
BS EN 60529 : IP65 category 1 certification (weatherproof)
Operating temperature 30C to + 50C
Performance
Easy to install / low maintenance
Designed to be permanently located indoors or outdoors
Available in 16amp (3.6kW) or 32amp (7.2kW) 16amp 3phase (11kW) or 32amp 3phase (22kW)
Mode 3 IEC61851-1 compliant communication protocol
Built-in LED charging status indicator
A built-in 3pole isolator accessible via an IP65 rated access door
A built-in 3pole isolator but with no RCBO fault current protection
400V AC / 50Hz
Multiple supply cable entry points
Note:
EVWP2036 & EVWP2046 is delivered assembled including a 3pole isolator but with no RCBO fault current protection
EVWP2056 & EVWP2066 is delivered with no isolator but comes with a separate RCBO fault current protection to be installed at source.
Options
Optional facility to lock isolator access door
Optional security key switch control (to lock of the unit)
All options available in drop down tabs
Related Items
WallPod Solar: EV Charging Unit | Type 2 Tethered | 5 Meter | 16/32 Amp(3.6/7.2kW) | IP65 |
Sold Out
The WALLPOD:EV SolarCHARGE is a cost-efficient EV charging unit which has been designed to benefit homeowners who have, or intend to install, a solar generation system Sepcifications IEC 61851-1 Mode 3...
WallPod Solar: EV Charging Unit | Type 2 Socket | 16/32 Amp(3.6/7.2kW) | IP65 |
Sold Out
The WALLPOD:EV SolarCHARGE is a cost-efficient EV charging unit which has been designed to benefit homeowners who have, or intend to install, a solar generation system Sepcifications IEC 61851-1 Mode...
WallPod Solar: EV Charging Unit | Type 1 Tethered | 5 Meter | 16/32 Amp(3.6/7.2kW) | IP65 |
Sold Out
The WALLPOD:EV SolarCHARGE is a cost-efficient EV charging unit which has been designed to benefit homeowners who have, or intend to install, a solar generation system Sepcifications IEC 61851-1 Mode 3...
WallPod : EV Multi-Mode | Type 2 Tethered | 5 Meter | 16/32 Amp(3.6/7.2kW) | 3 Pin Socket | IP65 |
€422,90
WallPod EV: Multi-Mode is a simple, low-cost, easy to install charging unit offering both, 16amp or available 32amp type 1 or type 2 Mode 3 charging as well as an...