WallPod : EV 3 phase type 2 socket 4pole Mcb & Rcd

WallPod EV: Commercial Charge is a simple, low-cost, easy to install mode 3 fast-charge EV charging station offering either 16amp single or 3 phase (type 2) IEC62196 sockets complete with hatch lock. Designed specifically for charging all Mode 3 electric vehicles in commercial locations such as offices, factories, restaurants, hotels, sport venues, etc for staff, customers or fleets.

Mcb & Rcd fault current & overload protection to be installed at source

Specifications

Warm white base unit (other colours available upon request or on the WallPod Customizer)
Green service pods (other colours available upon request or on the WallPodCustomizer)
Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
Glow wire rating tested to IEC60695-2-13
BSI certificated to BS EN 60335-1 for safe use in the home
Manufactured in compliance with BS7671 wiring regulations
Compliant with IET EV regulations
Corrosion resistant
UV stabilised
BS EN 60529 : IP65 category 1 certification (weatherproof)
Operating temperature -30C to + 50C

Performance

Easy to install / low maintenance
Designed to be permanently located indoors or outdoors
Available in 16amp (3.6kW) or 32amp (7.2kW) 16amp 3phase (11kW) or 32amp 3phase (22kW)
Mode 3 IEC61851-1 compliant communication protocol
Built-in LED charging status indicator
20amp or 40amp Mcb fault current protection to be installed at source
Rcd fault current protection to be installed at source
400V AC / 50Hz
Multiple supply cable entry points

Note:
EVWP2036 & EVWP2046 is delivered assembled including a 3pole isolator but with no Mcb & Rcd fault current & overload protection
EVWP2056 & EVWP2066 is delivered with no isolator but comes with a separate Mcb & Rcd fault current & overload protection to be installed at source.

Options
Optional security key switch control (to lock of the unit)
All options available in drop down tabs