WallPod : EV Economy Boost type 2 tethered cable 5m
EVEB0030
€458,20
WallPod EV: Economy Boost is a simple low-cost and easy to install 16amp or available 32amp Mode 3 EV charging station available with J1772 (type 1), IEC62196 (type 2) tethered leads or IEC62196 (type2) socket, designed specifically for charging electric vehicles at home.
To make the most of late night low cost electricity tariffs, this unit has been designed with a built-in time clock that allows the charging of the electric vehicle to automatically commence during off- peak electric rates but should additional EV charging be required at any time a simple charge boost button is available as standard.
- A simple, cost effective Mode 3, 16amp or available 32amp specifically designed for charging electric vehicles at home at timed off-peak hours
- Available in all tethered lead (type 1 and type2 ) and socket (type2) versions
- Off-peak charging complete with day time boost
- Built-in time clock control
- Built-in charge boost button
- Easy to install and maintain
- ZE Ready 1.2 Tested and Nissan Accredited
- Believed to be the lowest priced full mode 3 fast charger in the UK
- OLEV approved / Grant eligible
- IP65 weatherproof (believed to be the highest weather rated product available for a homecharger on the market
- CE Certified
- BSI Certificated
- Corrosion resistant
- UV stabilised
- Incredibly hard-wearing
- Built-in overload and DC sensitive fault current protection
Specifications
- Warm white base unit (other colours available upon request or on the WallPod Customizer)
- Green service pods (other colours available upon request or on the WallPodCustomizer )
- Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
- Glow wire rating tested to IEC60695-2-13
- BSI certificated to BS EN 60335-1 for safe use in the home
- Manufactured in compliance with BS7671 wiring regulations
- Compliant with IET EV regulations
- Corrosion resistant
- UV stabilised
- BS EN 60529 : IP65 category 1 certification (weatherproof)
- Operating temperature 30C to + 50C Performance
- Easy to install / low maintenance
- Designed to be permanently located indoors or outdoors
- Available in both 16amp (3.6kW) or 32amp (7.2kW)
- Mode 3 IEC61851-1 compliant communication protocol
- Built-in LED charging status indicator
- A built-in 20amp or 40amp RCBO accessible via an IP65 rated access door
- Full overload and DC sensitive fault current protection
- 230V AC / 50Hz
- Multiple supply cable entry points
Options
- Optional facility to lock RCBO access door
- Optional security key switch control (to lock off the unit)
All options available in the drop down tabs
ÍâÍ_
Related Items
EV Public Charging Cable | Type 2 to Type 2 | 16/32 Amp | 3.6/7.2 kW | 5/10 Metre |
€112,00
Our charging cables are of the highest quality and standard.
They allow you to charge your car from any public or home EV charging point and come in 5 or 10 meters to suit all your needs.
The Type 2 end of this cable must always be plugged directly into a charge point socket, this can not be used as an extension or an adaptor to a tethered lea
-
-16/32 Amp single phase at 3.6/7.2 kW
-Type 2 to Type 2 (IEC62196 / Mennekes)
-5/10 meter long Lightweight and ultra-flexible easy to store and transport.
-Long lasting and reliable
-IEC certified
-TUV certified
-CE compliant
-IP44 rated
-Operating voltage 240VAC
-Tested to 2,500 VDC
-Operating temperature range -30C to +60C
-Hard wearing, polybutylene terephthalate (PBT) handle
-Copper alloy contacts
Disclaimer: The look might slightly differ to the pictured cable. All function and specifications are the same.
EV Public charging cable | Type 2 to Type 2 - 3 Phase | 32 Amp | 22 kW | 5/10 Metre |
€152,00
Our charging cables are of the highest quality and standard.
They allow you to charge your car from any public or home EV charging point and come in 5 or 10 meters to suit all your needs. This is the 3 Phase version.
The Type 2 end of this cable must always be plugged directly into a charge point socket, this can not be used as an extension or an adaptor to a tethered lead.
-
-32 Amp 3 phase at 22 kW
-Type 2 to Type 2 (IEC62196 / Mennekes)
-5/10 metre long Lightweight and ultra-flexible easy to store and transport.
-Long-lasting and reliable
-IEC certified
-TUV certified
-CE compliant
-IP44 rated
-Operating voltage 400VAC
-Tested to 2,500 VDC
-Operating temperature range -30C to +60C
-Hard-wearing, polybutylene terephthalate (PBT) handle
-Copper alloy contacts
Disclaimer: The look might slightly differ to the pictured cable. All function and specifications are the same.
WallPod : EV Charging Unit | Type 2 Socket | 16/32 Amp(3.6/7.2kW) | IP65 |
€320,00
A simple, affordable CommercialCharger ideal for charging all Type 1 and type 2 compatible vehicles at home. A simple, cost effective Mode 3, 16amp or available 32amp specifically designed for...
WallPod : EV charging unit | Type 2 Tethered | 3 Phase | 16/32 Amp(11/22kW) | 5 Metre | IP65 |
€513,00
A simple, low cost, Wall Mounted home charger ideal for charging European Three phase cars. You will need a 3 phase supply to install this unit. A simple, cost effective...