EV Public Charging Cable | Type 1 to Type 2 | 16/32 Amp | 3.6/7.2 kW | 5/10 Metre |
Our charging cables are of the highest quality and standard.
They allow you to charge your car from any public or home EV charging point and come in 5 or 10 meters to suit all your needs.
The Type 2 end of this cable must always be plugged directly into a charge point socket, this can not be used as an extension or an adaptor to a tethered lead.
-16/32 Amp single phase at 3.6/7.2 kW
-Type 1 (SAEJ1772) to Type 2 (IEC62196 / Mennekes)
-5/10 metre long Lightweight and ultra-flexible easy to store and transport.
-Long lasting and reliable
-J1772 plug complete with padlock facility (padlock available in options)
-Operating voltage 240VAC
-Tested to 2,500 VDC
-Operating temperature range -30C to +60C
-Hard-wearing, polybutylene terephthalate (PBT) handle
-Copper alloy contacts
This cable comes with Type 2 and Type 1 connectors. The Type 2 must be connected to the charge point socket and Type 1 to your car.
This cable is suitable for the following vehicles:
Data Sheet PDF
Disclaimer: The look might slightly differ to the pictured cable. All function and specifications are the same.
WallPod : EV Charging Unit | Type 2 Socket | 16/32 Amp(3.6/7.2kW) | IP65 |
A simple, affordable CommercialCharger ideal for charging all Type 1 and type 2 compatible vehicles at home. A simple, cost effective Mode 3, 16amp or available 32amp specifically designed for...
EV Home charging cable | Type 1 to Schuko plug | 10/16 Amp | 5/10 Metre | Mode 2 |
Type 1 Portable Mode 2 EURO 2Pin EVSE Charger (10A/16A) 5M.
This cable is suitable for charging from EU sockets.
EV Charging Cable Carry Case
Switch between 10amp and 16amp
-EU Schuko power plug
-Type 1 charging plug (J1772)
-Voltage range: 220V ± 10%
-Maximum power: 2.2 kW / 3.6kW
-Auto charge recovery: Yes
-Over current protection: Yes
-16amp cable 3G2.5 + 2 x 0.75mm
-10,000 mating cycles
-Cable strain relief feature insulated terminal design
-Built-in LED charging status indicator
-Operating temperature: -30° to +50°
-CE certified / TUV certified
This cable has a type 1 socket for your car. Suitable for the following cars:
WallPod : EV charging unit | Type 1 Tethered | 16/32 Amp(3.6/7.2kW) | 5 Metre | IP65 |
A simple, affordable Mode 3 HomeCharger ideal for charging all Type 1 compatible vehicles at home such as Nissan + Kia. J1722 (type 1) charging plug attached to a 5meter...
Type 2 to Type 1 Cable Adaptor/Converter | 16/32 Amp | 1 Metre |
This adaptor / converter is a simple solution to convert an existing Type 2 connector on your cable or charge point to a Type 1 saving time and money. No...
WallPod : EV Charging Unit | 3 Pin Socket | 13 Amp | IP65 | UK |
Description The Entry Level EV Charger ideal for home builders wishing to offer low-cost EV Charging to satisfy planning applications and requirements Fully prepared for future upgrade to full mode...
WallPod : EV Multi-Mode | Type 1 Tethered | 5 Meter | 16/32 Amp(3.6/7.2kW) | 3 Pin Socket | IP65 |
WallPod EV: Multi-Mode is a simple, low-cost, easy to install charging unit offering both, 16amp or available 32amp type 1 or type 2 Mode 3 charging as well as an...
Type 1 tethered cable | 16/32amp | 3.6/7.2kW | J1772 | 5/10 Metre |
This tethered cable can be used as a replacement on existing charge points in case you need to change the type or length. Note: This will require fitting by an...